Quick Answer: How do I change the grid orientation in rhino?

How do you flip a CPlane?

Pick an x-axis direction or press Enter. The Flip option reverses the direction. The IgnoreTrims option uses entire untrimmed underlying surface. The Through option moves the construction plane origin to a selected point.

How do I rotate a view in Rhino?

2) Open the file in a new Rhino window. Make sure you’re in 4-view mode and use Zoom All Extents to see the entire model in all viewports. 3) In the Top viewport, Select all (Ctrl+A) and use Rotate to rotate the entire model to the Axo angle desired (often this will be 30°).

How do you move the CPlane in rhino?

Rotate steps

  1. Pick the start of the rotation axis.
  2. Pick the end of the rotation axis.
  3. Type the angle to rotate the construction plane. Or.
  4. Pick two points to specify the angle.

How do you align surfaces in Rhino?

Steps

  1. Select the objects to align, and press Enter.
  2. Specify an alignment option.
  3. At the prompt for an alignment point, pick a location, or press Enter to align based on the overall bounding box of all selected objects.

How do you scale a 3D object in rhino?

Steps

  1. Select objects.
  2. Pick an origin.
  3. Type the x scale factor, or pick two reference points. (Press Enter for a scale of 1.0.)
  4. Type the y scale factor, or pick two reference points. (Press Enter for a scale of 1.0.)
  5. Type the z scale factor, or pick two reference points. (Press Enter for a scale of 1.0.)
THIS IS SIGNIFICANT:  How do I print a DXF file?

How do you change the size of something in Rhino?

5 Steps to Scaling Objects in Rhino 5

  1. Type “Scale” in the upper lefthand box. Three options appear. …
  2. Select Scale 2D to scale in two directions. …
  3. Choose Scale 3D to scale in three directions. …
  4. Choose a reference line, and move your mouse to dramatically scale the object.

What is the C plane?

A CPlane (construction plane) is simply an imaginary plane that you do your drawing on. … The named views set cplanes option is for those who don’t want Rhino to have a different construction plane for each viewport.

What is elevator mode in Rhino?

Normally when you click a point, Rhino gets X, Y and Z values with the single click. Elevator mode give you a second click to set the CPlane Z. Start a command that prompts for a point, like Circle. With your pointer in the Perspective view, press and hold Ctrl (Cmd in OSX).

How do I rotate top view in Rhino?

To rotate view around object

Ctrl + Shift + drag with the right mouse button. The right view rotates around the object.