How do you make a multibody part in SolidWorks?

How do I create a multibody part in SolidWorks?

To save an assembly as a multibody part document:

  1. Open an assembly document.
  2. Click File > Save As. The Save As dialog box appears.
  3. Set the Save as type to Part (*. prt, *. …
  4. Select one of the following: Exterior Faces to save the exterior faces as Surface Bodies . …
  5. Select or clear the following: …
  6. Click Save.

What is a multi body part in SolidWorks?

A multibody part consists of multiple solid bodies that are not dynamic. If you need to represent dynamic motion among bodies, use an assembly. Tools such as Move Component, Dynamic Clearance, and Collision Detection are available only with assembly documents.

How do I make part of a part into SolidWorks?

To insert a part:

  1. With a part document open, click Insert Part (Features toolbar) or Insert > Part.
  2. Browse to a part document and click Open. …
  3. Under Transfer, select any combination of items from the inserted part to be included in the derived part.

How do you make a featured body in SolidWorks?

Converting Features to Bodies and Surfaces

  1. Open an assembly file, such as the HousingAssy. …
  2. In the FeatureManager design tree, right-click Housing and click Open Part . …
  3. At the top of the FeatureManager design tree, right-click Housing and click Convert to Bodies.
  4. In the dialog box: …
  5. Click Window > HousingAssy.
THIS IS SIGNIFICANT:  Quick Answer: Is SketchUp app free?

How do you make a multibody part?

To save an assembly as a multibody part document:

  1. Open an assembly document.
  2. Click File > Save As. The Save As dialog box appears.
  3. Set the Save as type to Part (*. prt, *. …
  4. Select one of the following: Exterior Faces to save the exterior faces as Surface Bodies . …
  5. Select or clear the following: …
  6. Click Save.

How do I make a part into assembly?

To create a part within an assembly:

  1. Click New Part (Assembly toolbar) or Insert > Component > New Part.
  2. For externally saved parts, type a name for the new part in the Save As dialog box and click Save.
  3. Select a plane or planar face (while the pointer is ).

How do you thicken in Solidworks?

Click Thicken (Features toolbar), or click Insert > Boss/Base > Thicken. In the graphics area, select a Surface to Thicken . In the PropertyManager, under Thicken Parameters, select the side of the surface you want to thicken. When you select Thicken Both Sides , it adds the Thickness you specify to both sides.