How do you read an apartment floor plan?

How do you read floor plans?

There should be clear lines, indicating the length of measurement between two points. Rooms are measured in feet and inches, and width and length. For instance, if you see 15′ x 12′ within the walls of a room on a floor plan, it means that the room is 15 feet wide (horizontal) and 12 feet long (vertical).

What do the numbers mean on a floor plan?

When reading the floor plans, you will probably notice a few circles with numbers and letters inside of them. These symbols are used to indicate a cross-section of that particular room or space that can be found elsewhere in the blueprints.

How do you read room dimensions?

For example, a dimension of a rectangular room on a blueprint, 14′ 11″ X 13′ 10″ equates to a room size of 14 feet, 11-inches wide by 13 feet, 10-inches long. Dimensions are expressed as width by length by height or depth in three-dimensional space.

What does F stand for on a floor plan?

House plan abbreviations

ABBREVIATION MEANING
FL Floor level (note: the floor level is provided as a figure relative to a datum, or universal reference point)
FW Floor waste
GM Gas meter
GPO General purpose outlet (i.e. power point)
THIS IS SIGNIFICANT:  Is Ansys compatible with Mac?

What does T in a circle mean on floor plans?

A small circle bisected by two parallel lines is a wall outlet, while a circle superimposed over an X is a ceiling light and a T hanging from a circle is a thermostat.

Are floor plans to scale?

Floor plans should be drafted to scale, which means reducing the size of your drawing so the entire space can reasonable fit on a piece of paper or screen. A common scale is 1/4 inch = 1 foot.

What do floor plans show?

A floor plan typically shows structural elements such as walls, doors, windows, and stairs, as well as mechanical equipment for the plumbing, HVAC, and electrical systems. Floor plans use stylized symbols that often look like the outlines of elements they represent.

What comes first in room measurements?

Room sizes

Room dimensions are presented in width by the length. For example, a room that has a dimension of 12′ x 16′ means it’s 12 feet wide (from side to side) by 16 feet long (from top to bottom).

What is length and width?

Length is describing how long something is while width is describing how wide an object is. 2.In geometry, length pertains to the longest side of the rectangle while width is the shorter side. 3. Length can also refer to an extent of time or a measure of distance.

Which comes first width or length?

The Graphics’ industry standard is width by height (width x height). Meaning that when you write your measurements, you write them from your point of view, beginning with the width. That’s important. When you give us instructions to create an 8×4 foot banner, we’ll design a banner for you that is wide, not tall.

THIS IS SIGNIFICANT:  How do I change a cut pattern in Revit?

Do floor plans include closet space?

Floor plan dimensions should not include closets.