Your question: How do you name a reference plane in Revit?

How do you rename a reference plane in Revit?

Just select the Ref Plane and you will see “<Click to Name>” at both ends of it.

How do you reference a plane in Revit?

Use the Line tool or the Pick Line tool to draw a reference plane.

  1. On the ribbon, click (Reference Plane). Architecture tab Work Plane panel (Reference Plane) Structure tab Work Plane panel (Reference Plane) …
  2. To draw a line: On the Draw panel, click (Line). …
  3. To pick an existing line: On the Draw panel, click (Pick Lines).

How do you add a reference line in Revit?

In the Family Editor, click Create tab Datum panel (Reference Line). Using the drawing tools, sketch the line. The line displays as a solitary solid line until selected or when highlighted during preselection. When selected or highlighted, the associated planes display according to the active view.

What is the use of reference plane in Revit?

Use the Reference Plane tool to draw reference planes to use as a guideline in your design. Reference planes are an integral part of family creation. Reference planes display in each plan view that you create for a model.

THIS IS SIGNIFICANT:  What is your weakness as an architect?

Where is the reference line in Revit?

In the Family Editor, click Create tab Datum panel (Reference Line). Using the drawing tools, sketch the line. The line displays as a solitary solid line until selected or when highlighted during preselection. When selected or highlighted, the associated planes display according to the active view.

What is the difference between reference plane and reference line in Revit?

What is the difference between reference planes and reference lines? A Reference Plane is an infinite plane that servers as a guide for drawing lines and geometry. A Reference Line creates a line similar to a reference plane, but that has logical start and end points.

What is reference line?

A reference line, also referred to as a base line, is a user-defined vertical or horizontal line in the graph. Use reference lines to compare, reference, or measure against the data values displayed in the graph. … Reference lines are available if the X or Y axis contains a metric.

How do I create a reference level in Revit family?

Add Levels

  1. Open the section or elevation view to add levels to.
  2. On the ribbon, click (Level). Architecture tab Datum panel (Level) …
  3. Place the cursor in the drawing area and click. …
  4. Draw level lines by moving the cursor horizontally. …
  5. Click when the level line is the correct length.

What are reference lines Revit?

Create a reference line that you can use when creating model geometry, or to create constraints for the geometry. In the Family Editor, you can add a reference line in any view and use the same drawing tools and techniques used when adding model lines. When you sketch a reference line, it displays as a single line.

THIS IS SIGNIFICANT:  How do I find a part in Solidworks?

How do you delete a reference plane in Revit?

The only way I’ve ever been able to get rid of them in your pull-down list of work-planes is to FIND the reference plane, pick it, then delete. It will automatically disappear from the list after this procedure.